Note in the above that the directory is C:\STEP5\S5DATEN\. Note: the filename must be XXXXXST.S5D (5 characters then ST.S5D). Select the Blocks Tab to choose the filename to which to store the program. Pressing F3 on either of these settings will let you change it. Parameter: COM1 (or the COM port you are using) If it doesn’t, check your communications cable and settings. You’ll see the message PLC Interface being checked With the cable connected to the PLC, select the PLC tab and highlight the Mode field and press F3 to Select Online. With STEP5 opened, do File > Project > Set Step 2: Information about the STEP 5 software and cable can be found here. The focus will be using the RS-232 to TTY download cable. This FAQ is to remind existing users or to teach new users how to upload. This is a frequently asked question – how do I upload from a Siemens S5 PLC using STEP 5? The Siemens S5 PLC family is now mature and obsolete, therefore not many newcomers to the PLC Programming field have experience with making a backup of the S5 PLC for backup or conversion purposes.
0 Comments
Leave a Reply. |